你的位置：首頁 > 新聞中心 > 行業動態 > 水分測定儀的工作原理詳解
新聞中心鹵素水分測定儀，紅外線水分測定儀，紅外水分測量儀根據各種所需測定水分的試樣的性質，提出了多種水分測定儀測定方法，
研究出眾多水分測定儀器，滿足了我們對水分定量分析的需求，以下我們將對幾種常用的水分測定方法（干燥法）做簡單的對比分析。
下面是水分儀專家小楊的分析
一、水分是唯yi揮發性物質；
二、樣品中其它成分由于受熱而引起的化學變化可以忽略不計；
缺點是精度較低，且不適用于測液體、氣體、和含揮發物質樣品。
三、不含有結合水；
鹵素快速水分測定儀是最近幾年隨著科技的日益進步，而快速發展起來的一種新型水分測定儀。
該儀器主要應用于固體樣品中游離水的含量測定，
通過高功率的鹵素?zé)艨焖偌訜?，在稱重系統上直接顯示樣品的重量變化，并同時在水分測定儀的顯示屏幕自動計算出樣品的水分值。
通過該方法和原理，鹵素快速水分測定儀也可以測定某些樣品的揮發含量或者含固量。
鹵素快速水分測定儀是由紅外快速水分測定儀改進而來，兩者最主要的區別是加熱方式不一樣：
鹵素快速水分測定儀的加熱源是環狀的鹵素?zé)簦t外快速水分測定儀的加熱源是普通的球形的白熾燈泡。
由于加熱燈的結構和原理不一樣，對樣品的測試結果也有一定的影響。
According to the properties of various samples needed to measure water, a variety of methods for the determination of water content are proposed.
A number of water measurement instruments have been developed to meet our needs for quantitative analysis of water. Below, we will make a simple comparative analysis of several commonly used water measurement methods (drying method).
The following is the analysis of moisture meter expert xiao Yang
Water is the only volatile substance;
2. The chemical changes of other components in the sample caused by heating can be ignored;
The disadvantage is that the accuracy is low, and it is not suitable for the measurement of liquid, gas, and volatile substance samples.
3. No combined water;
Halogen rapid water meter is a new type of water meter developed rapidly with the progress of science and technology in recent years.
This instrument is mainly used for the determination of free water in solid samples.
Through the quick heating of the high-power halogen lamp, the weight change of the sample is directly displayed on the weighing system, and the moisture value of the sample is automatically calculated on the display screen of the moisture meter.
By means of this method and principle, the halogen rapid moisture meter can also determine the volatile content or solid content of some samples.
The halogen rapid moisture meter is improved from the infrared rapid moisture meter. The main difference between the two is the heating method:
The heating source of halogen rapid moisture meter is ring halogen lamp, and the heating source of infrared rapid moisture meter is common spherical incandescent bulb.
Due to the different structure and principle of the heating lamp, the test results of the sample are also affected.
銷售一部